Opis
„SFS Poland” działa przy międzynarodowych projektach w sektorze technicznym i przemyśle przetwarzającym surowce mięsne. Działamy w takich krajach jak: Holandia, Belgia, Niemcy, Wielka Brytani, Norwegia, Francja i Polska.
Naszym kontrahentem jest międzynarodowa firma,świadcząca kompleksowe usługi w zakresie transportu oraz przeładunku towarów ciężkich oraz ponadgabarytowych.
Obecnie poszukujemy pracowników na stanowisko:
Operator dźwigu gąsiennicowego samobieżnego
Lattice Boom Crane Operator (also: Strutboom Crane Operator)
Miejsce pracy: Belgia, Holandia, Wielka Brytania, Norwegia, budowy na terenie Europy
Ilość wakatów: 4
Aplikuj
Purpose of the Job
Executing lifting activities independently with a lattice boom crane with superlift and luffing fly jib and operating the crane in a safe manner according to the instructions of the manufacturer. Responsible for the crane. Following up on the technical status of the crane and responsible for small/daily housekeeping and maintenance of the crane and auxiliary materials.
Key tasks & Responsibilities
• Safe execution, in accordance with standards and instructions, of the assigned lifting / transport activities.
• Directing other crane operators, riggers, slinger-signallers, truck drivers during these activities.
• Execution of these activities conform contract and planning, preventing of extra costs.
• Striving for continuous improvement towards own performance and that of team during project.
• Being an Ambassador of towards (future) clients, suppliers, other third parties and internally.
Result areas and associated core activities & output
• Checks documents (planning instruction sheet, certificates, lifting plan, lifting charts, etc.), makes sure he understands and is able to apply these.
• Driving:
• Drives in a correct way: is aware of permit itineraries, has no accidents, considers the roads and terrains, is able to find his route, ...
• Manoeuvres his crane to the correct position.
Positioning:
• According to lifting plan (weight of load/hook/chains).
• Erects/positions the crane correctly considering the load/order, as well as with regard to the initial position as to the position during the radius.
• Checks the pressure on the ground: pulls out and locks the outriggers, lays out the crane mats, controls the roadbed, levels the crane (wheels of the ground, mark off hoisting area, ...).
Lifting:
• Correctly adjust the LMI (“safe load indicator”).
• Operates within his class strutboom cranes with any configuration (main boom, superlift, luffing fly jib) in a correct and safe way.
• Hoists without damages.
• Lifts with three simultaneous movements.
• Able to drive safely with load in hook.
• Able to perform a tandem lift.
Assembling/dismantling *Marks the assembly area and the hoisting area.
• Makes the assembly area free of obstacles.
• Instructs the truck drivers how, and in what order, to arrive on the assembly area.
• Checks the crane parts for eventual damages before unloading.
• Correctly (un)loads crane parts from/on its transport.
• Responsible for (dis)assembling the crane.
• Controls all crane parts, safety pins, safety switches, cylinders, etc. when assembling the crane. Also controls superlift trailer and luffing fly jib sections.
• Correctly slings simple and complex loads, using the correct slinging material.
• Correctly determines the required number of reeves.
Maintenance / Inspections
• Keeping the crane and material neat and in good state.
• Performing of small maintenance/repairs.
• Daily inspection: visual assessments of crane and material on maintenance, neatness, damage.
• Reporting of damages.
• Filling and handing in the crane and maintenance checklists.
• Parking the crane in the proper and prescribed manner.
• Making sure it is fully tanked after work at the end of the day.
Improvement
• Initiate continuous improvement initiatives for own performance in consultation with superior and following up on them.
• Participate in (improvement) Projects.
• Following of training for improvement in the role and/or performance.
Communication & Administration
• Attending toolbox meetings in a contributive manner.
• Attending other meetings when asked and where needed.
• Ensures crane document map is complete (crane certificates, crane instruction manual, lifting tables, ...).
• Correctly filling the worksheet & getting it signed by the client. Passing these on as instructed and in time.
• Reports the work on site and possible extra works according to standards and instructions.
Health, Safety, Quality & Environment
• Responsible for a safe operation of the crane.
• Adhering to all legislation and instructions, as well as safeguarding this adherence, as well as regulations with regard to safety.
• Pointing out risks with regard to safety, the environment or health, reporting these risks to Quality department and taking or having corrective / preventive measures taken.
• Following of training prescribed by the employer.
• Proper and careful use of work equipment, Personal Protective Equipment and hazardous materials.
• Execution of all activities according to the processes described in the QESH Management System.
General
• Carrying out all other activities that could be reasonably demanded and/or are needed in the interest of the business – in practice usually Rigger/Slinger-Signaller (when certificates in place) or acting as second crane driver on other types of cranes (telescopic) when needed, work on depot, within different projects, etc.
• Complying with and following up of the company rules and regulations.
Job Requirements – Competencies & Profile
Education
• EQF level 3 or 4 (secondary school), technical education
• CPCS lattice boom crane certificate required + CPCS Rigging Certificate + CPCS Banksman/Slinger certificate (UK).
• TCVT deskundigheidsbewijs required (NL/BE)
• Valid drivers’ licence BC/CE
• Industry related Safety Certificate (e.g. VOL-VCA)
• Other training related to the proper fulfilling of the role and/or the performance
Knowledge / Skills
• Technical knowledge with regard to cranes and transport and auxiliary equipment
• Good command of the local and English language (spoken and written)
• Good communication skills
• Knowledge of the influence of the position of a crane on the lifting capacity
• Able to interpret lifting charts
• Able to make a reliable estimation of the load
• Basic knowledge of current and accepted computerised packages.
• Good knowledge of the computer system of the crane – knows the consequences of an action of this system.
• Knowledge of Safety, Health, Quality and Environmental regulations and procedures
• Knowledge of standard arm signalling signs
• Knowledge of relevant legislation and instructions
• Knowledge of (de/re)rigging of a crane, able to foresee and detect difficulties with it.
• *Basic knowledge of mechanics and hydraulics to do small repairs.
Experience
• 6 months experience as a Rigger.
• 2 year experience as a Crane Operator (in crane class intended) to operate independently.
Organisational Competencies
• Client and Service Orientation, Quality and Safety Awareness, Loyalty, Entrepreneurial, Business Awareness
Position specific competencies
• Flexibility, Independence, Communicating, Integrity, Initiative, Responsibility
Osoby zainteresowane ofertą prosimy o przesłanie CV w języku angielskim (ewentualnie niemieckim, holenderskim albo francuskim), te w języku polskim będą rozpatrywane jako ostatnie
Proszę załączyć koniecznie skan certyfikatów potwierdzających kwalifikacje zawodowe, kopię szkoleń BHP (VCA,SCC), Personal Safety Logbook (zielona/pomarańczowa książeczka), a także referencje oraz wszelkie pozostałe dokumenty potwierdzające posiadane doświadczenie i uprawnienia
Skontaktujemy się wyłącznie z wybranymi kandydatami.